Software Installation
CP-132U Series User’s Manual
3-49
the structure of the program.
TxD buffer size
The TxD buffer is the transmission (output) buffer allocated by the system for each port.
RxD buffer size
The RxD buffer is the receiving (input) buffer allocated by the system for each port.
F5 Group Edit
This is a convenient function that allows you to edit the configuration of several ports at
one time as a group.
Loading the Driver
After completing the setup procedure, run BIN\DP-DRV.EXE from the DOS prompt to
load the driver. The driver will automatically detect the boards that have already been
installed. If one or more board is detected, you will see a message similar the following:
Smartio/Industio Family DOS driver Version 1.5
Setup driver …
CP-134U series (Bus= x ,Dev=y) : OK!
Device driver setup O.K.
This means that the CP-134U Series driver has been installed properly. At this point, you