Filter
Top Products
— 4 —
Mounting Dimensions (unit = mm)
Rear View
Side View
Front View
DlN-Rail Kit
DlN-Rail
105.00
9.00
35.00
135.00
24.324.56 46.77 39.37
135.00
Wall Mounting Kit
10
10
5
7.75
30.50
7.75
3.5
6
6
66.80
57.05
13.9 18.2 13.9
30.00
15.0
51.3
13.9
80.2
DlN-Rail Kit
7.5 55 7.5
27.20
48.30
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of the EDS-510A when you take it out of the box. If you need to
reattach the DIN-Rail attachment plate to the EDS-510A, make sure the stiff
metal spring is situated towards the top, as shown by the following figures.
STEP 1—Insert the top of the
DIN-Rail into the slot just below the
stiff metal spring.
STEP 2—The DIN-Rail attachment
unit will snap into place as shown in
the following illustration.
metal
spring
DIN-Rail
metal
spring
DIN-Rail
To remove the EDS-510A from the DIN-Rail, simply reverse Steps 1 and 2
above.