Filter
Top Products
NPort 5600 Series User’s Manual Configuring NPort Administrator
5-28
Disabled Mode
When Operation mode is set to Disabled, that particular port will be disabled. Select the Apply the
above settings to all serial ports option to apply this setting to the other ports.
RFC2217 Mode
TCP alive check time
Setting Factory Default Necessity
0 to 99 min 7 min Optional
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: NPort 5600 automatically closes the TCP connection if there is no TCP activity for
the given time. After the connection is closed, NPort 5600 starts listening for another Real COM
driver connection from another host.