Introduction
Smartio C104H/PCI Series User’s Manual 1-5
Installation Guide
This section gives a brief summary of how to install the Smartio C104H/PCI Series
under each supported operating system. The installation is simple and involves the
following stages:
Check the PCI BIOS settings
Install the Smartio C104H/PCI Series board See Chapter 2 “Hardware
and the connection cable Installation”
Install the software from the diskette See respective O.S. Section
Configure the driver for the board and ports in Chapter 3 “Software
Installation”
Connect the devices with the cable See Chapter 4 “Serial
Programming Tools” for cable
wiring
Restart the system See Chapter 3 “Software
Check the driver initialization status Installation” for board init.
status.
If the system restart successfully, you may
develop your applications or See Chapter 4 “Serial
execute the desired applications Programming Tools”