Filter
Top Products
3-22 Smartio C104H/PCI Series User’s Manual
Board and Port Ready Stage
Board and Port Ready Stage for Windows 95 and Windows 98 is a slight different.
In this last stage, you will complete the driver installation.
Windows 95
After the port configuration, you can immediately
use the COM ports of the Smartio C104H/PCI
Series board without restarting Windows 95.
Windows 98
After the port configuration, click [Finish] button.
The COM ports of the Smartio C104H/PCI Series
board can be used without restarting Windows 98.
Note! If an error message similar to “C104PCI Series(BusNo=x,
DevNo=x, Port1=COMx) interrupt number is invalid!” pops
up, refer to “Troubleshooting” chapter for solutions.
If you want to add more boards while the driver has been installed, simply plug the
Smartio C104H/PCI Series board and Windows 95/98 will automatically detect the
newly plugged board and skip to Port Configuration stage to do port setting.
Up to now, the driver installation of the Smartio C104H/PCI Series is complete and
successful, including the board and port configuration. However, if changes of the
board and port configuration are needed, please refer to the next section,
“Configuring Board and Port”, for more configuration details.
Once the board and the driver are installed and the driver restarts successfully, you
can start to develop applications with the PPCCoommmm library (See “Serial Programming
Tools”) or the Microsoft Win32 API. You can also execute any ready-made
applications, such as PPCCoommmm utility Terminal emulator (See “Serial Programming
Tools”) or HyperTerminal to transmit/receive data, as well as Remote Access