MRV Communications LX-4000 Series Server User Manual


 
451-0308 MRV Communications, Inc. www.mrv.com 19
Installing the LX-4000 Series
Figure 10 - LX Series 4032 DC Version with Modem Rear Panel
Figure 11 - LX Series 4048 AC Rear Panel
RCV
The RCV LED is one of two integral LEDs on the 10/100 jack. This yellow LED flashes to indicate
receive activity on the link.
LINK
This green LED defaults to a link good indicator. If the link is present and operating, the LED comes
ON.
100 Mbps
This green LED indicates speed. If the link is 100 Mbps, the LED comes ON. On LX-4048 units, this
LED is on the front of the unit.
Environmental and Installation Considerations
Unit must be installed in an environment with 5% to 90% humidity, noncondensing, 0° -
40° C (32°-104° F).
Do not choose a location where the unit will be exposed to direct sunlight or subjected to
vibration.
Do not place an object on the side(s) of the unit that might block airflow through the unit.
10/100 ETHNT
DIAG
100
RCV
100 Mbps
LE
D
LINK
RCV LINK
-24/-48/-60 VDC
1.2 MAX
+ -
A
+ -
B
9
10
11 12
13
14 15
16
1234 5678
DIAG Port (Port 0)
25 26
27
28
29
30 31
32
17 18 19 20 21 22
23
24
TELCO
LINE
Modem Port
100-240VAC
1.0A 50/60Hz
10/100 ETH
RCV
LINK
RCV LINK
10/100
Interface
91011121314151612345678
17 18 19 20 21 22 23 24
33
34
35 36 37 38
39
40
25 26 27 28 29
30 31
32
41
42
43 44 45
46 47 48