Filter
Top Products
MRV Communications, Inc. – Installation Manual
51
Captive
Screws I
Cables holding
the rear door
Visual Inspection
Visually check that all parts and cables are connected.
Closing the rear door
Put back the Rear Door and push it. Close the four screws I -- see Figure 6.11.,
Pay attention to the cables holding the rear door.
.
Connect to the Ground the 2 grounding screws (screw S from the
TereScope, and screw A from the JMP-8).
Installation Completion
Check that the heads appear as shown in the photographs below.
Fig. 6.12: Mounted TS5000 – Right View
Fig. 6.11: Closing the rear door,
Screws I