Filter
Top Products
5-4
MS-7181 Micro-ATX Mainboard
Create Disk Array
Use the up and down arrow keys to select the Create Array command and press
<Enter>.
Select Array Mode and press <Enter>, a list of array modes will appear. Highlight
the target array mode that you want to create, and press <Enter> to confirm the
selection. If RAID 1 is selected, an option list will popup and enable the users to select
Create only or Create and duplicate. Create only will allow BIOS to only create
an array. The data on the mirroring drive may be different from the source drive.
Create and duplicate lets BIOS copy the data from the source to the mirroring
drive.
MSI Reminds You...
The “Channel”, “Drive Name”, “Mode” and “Size (GB)” in the following
example might be different from your system.