Filter
Top Products
Chapter 14 – Specific AT Commands
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 100
Select Voice Gain +WSVG
Description: The product has 2 voice gain paths. This command provides a means for selecting the
desired voice path.
Values: <n> Path
0: HANDSET (Default)
1: HEADSET
Syntax: Command syntax: AT+WSVG=<n>
Command Possible Responses
AT+WSVG=0
Note: Select Path 1 (Default)
OK
Note: Path 1 selected
AT+WSVG=1
Note: Select Path 2
OK
Note: Path 2 selected
AT+WSVG=?
Note: Get the list of possible
values
+WSVG: (0-1)
Note: possible values 0 or 1
AT+WSVG?
Note: Get the current value
+WSVG: 1
Note: Path 1 is selected
Status Request +WSTR
Description: This command returns additional information for the initialization sequence and network
status.
Values: If <status> is 1 (initialization sequence), then:
<value>
0: Not started
1: On going
2: Finished
If <status> is 2 (Network status), then:
<value>
0: No network
1: Network available
Syntax: Command syntax: AT+WSTR=<status>
Response syntax: +WSTR: <status>,<value>
Command Possible Responses
AT+WSTR=1
Note: Select the status 1 (INIT SEQUENCE)
+WSTR: 1,2
OK
Note: Init finished
AT+WSTR=2
Note: Select the status 2 (NETWORK STATUS)
+WSTR: 2,1
OK
Note: The network is available
AT+WSTR=?
Note: Ask the list of possible values
+WSTR: (1-2)
Note: possible values : 1, 2