Filter
Top Products
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 153
Reset IP Protocol Statistics $QCIPR
Description: This command is used to zero all of the IP statistics counters.
Syntax: Command syntax: AT$QCIPR
Command Possible Responses
AT$QCIPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCIPR
Note: Reset IP statistics counter
$QCIPR:
OK
Note: Command is valid
Dump UDP Protocol Statistics $QCUDPD
Description: This command is used to dump the UDP statistics in ASCII format to the DTE.
Syntax: Command syntax: AT$QCUDPD
Command Possible Responses
AT$QCUDPD?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCUDPD
Note: Dump UDP statistics information
$QCUDPD:
InDatagrams :0000 OutDatagrams :0000
….
OK
Note: Command is valid
Reset UDP Protocol Statistics $QCUDPR
Description: This command is used to zero all of the UDP statistics counters.
Syntax: Command syntax: AT$QCUDPR
Command Possible Responses
AT$QCUDPR?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCUDPR
Note: Reset UDP statistics counter
$QCUDPR:
OK
Note: Command is valid
Dump TCP Protocol Statistics $QCTCPD
Description: This command is used to dump the TCP statistics in ASCII format to the DTE.
Syntax: Command syntax: AT$QCTCPD
Command Possible Responses
AT$QCTCPD?
Note: Display the current setting
ERROR
Note: Command is not valid
AT$QCTCPD
Note: Dump TCP statistics information
$QCTCPD:
ActiveOpens :0000 PassiveOpens :0000
….
OK
Note: Command is valid