Filter
Top Products
106 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD
Terminal Adapter AT Commands & S-Registers
+++AT<cr> In-band escape code
<break>AT<cr> Out-of-band escape code
Switch Configuration, p. 108 %A97 Dialing method
!C0 Switch type
!C6 SPID 1
*!C6 SPID 2
!D3 SAPI-0 data TEI
*!D3 SAPI-0 voice TEI
!L List DN, SPID, TEI,
Data
protocol & switch type
>Dn Embedded Protocol
Analyzer
!N1, !N2, !DN1, !DN2, !EN1, !EN2 Data DN/MSN
*!N1, *!N2, *!DN1, *!DN2, *!EN1, *!EN2 Modem DN/MSN
!Z=n Rate adaptation protocol
Serial Port Configuration, p. 114 En Command mode echo
L List telephone numbers
L5 List current operating
parameters
L6 List S-register values
L8 Display low level ISDN
status
Qn Status displays
Sr=n Set S-register
Sr? Read S-register
Vn Terse/verbose result
codes
Xn Connect messages
Z Restore parameters to
current power-up profile
&Cn DCD (Data Carrier
Detect) control