Filter
Top Products
MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 15
Hardware Installation
9. Connect the ISIHP-2S/2U to your ISDN telephone wall jack with
the provided modular telephone cable.
NT1
Device
ISIHP
-2S
U Interface
S Interface
S/T Interface
ISDN line enters
building
Figure 1-4: ISDN Interfaces at Customer Premises
Note: The ISIHP communicates over ISDN lines. If you dont have
a standard modular jack near your computer, you should install
one or have one installed by your telephone company. In the US,
installation kits and adapters are available wherever telephones
are sold.
Note: If S/T-interface ISDN network connection cable is used, the
ISDN phone cord should be connected between the ISDN network
connection cable and the NT1 device. If the S/T-interface model
(ISIHP-2S, -4S, or 4SD) is used, then the S/T-interface must be
connected to the S-interface on the NT1 device.
10. Turn on power to the computer. Now you are ready to install
software.