Filter
Top Products
MultiMobile MT128ZLX User Guide 6: Windows ME API Usage
209
Windows ME Vcomm: Dual Channel Access Example (MultiLink)
NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the
network to which you will be connected.
2. If you are connecting to a non-Windows server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP
addresses before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
If you would like to use multi-linking with your VCOMM connection, first be sure that your ISDN provider
supports a 128kbps MLP option.
In order to use VCOMM multi-linking, you must install a second ISDN device in the Modems applet in the
Control Panel. The first ISDN device was installed automatically during the initial driver installation.
1. Install the virtual modem for your MT128ZLX in Windows ME by selecting Start | Settings | Control
Panel | Add. Windows ME will prepare to detect your modem. The Install New Modems screen will
appear.
Click on “Do not detect my modem; I will select it from a list.”
Click Next>.
3. The next screen displays a list of modem manufacturers and modem models. In the Manufacturers
pane, highlight “MultiTech.” In the Models pane, highlight “MultiMobile MT128ZLX-ST (modem).”