Filter
Top Products
MultiMobile MT128ZLX User Guide 2: Windows 95 API Usage
31
Windows 95 Vcomm: Single Channel Access Example
NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the
network to which you will be connected.
2. If you are connecting to a non-Windows server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP
addresses before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
1. Go to Start | Programs | Accessories | Dial-Up Networking. At the Dial-Up Networking folder,
select Make New Connection.
2. The Make New Connection screen appears. Enter a descriptive name for the connection. In the
“Select a Modem” drop-down box, highlight MultiMobile MT128ZLX-ST (modem).
3. At the next screen, enter the area code and phone number of your ISP or of the remote device you will
be calling using this connection. Select the appropriate Country Code and click Next> to complete the
setup.