Filter
Top Products
MT202TD User Guide
8
Chapter 2 - Installation and Connection
Introduction
The installation of the MT202TD consists of setting DIP
switches to the appropriate settings and then making the serial,
phone line, and electrical power connections.
Power
Power is supplied to model MT202TD through an AC power
transformer. The transformer supplies low voltage DC to the
modem and plugs into any conventional 117 VAC, 60 Hz,
power outlet.
Warning: Use only the power transformer supplied with the
modem. Use of any other transformer could cause damage to
the modem.
Safety Warnings
l Never install telephone wiring during a lighting storm.
l Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
l This product is to be used with UL- and CUL-listed
computers.
l Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
l Use caution when installing or modifying telephone lines.
l Avoid using a telephone (other than a cordless type) during
an electrical storm. There is a remote risk of electrical
shock from lightning.
l Do not use the telephone to report a gas leak in the vicinity
of the leak.
l To reduce the risk of fire, use only 26 AWG or larger
telecommunication line cord.