Filter
Top Products
38
Chapter 4 - Commands
VALUES: n = speed
DEFAULT: $MB33600 bps
DESCRIPTION: $MB75 selects CCITT V.23 mode.
$MB300 selects 300 bps on-line.
$MB1200 selects 1200 bps on-line.
$MB2400 selects 2400 bps on-line.
$MB4800 selects 4800 bps on-line.
$MB9600 selects 9600 bps on-line.
$MB14400 selects 14400 bps on-line.
$MB19200 selects 19200 bps on-line.
$MB28800 selects 28800 bps on-line.
$MB33600 selects 33600 bps on-line.
COMMAND: Nd
VALUES: d = 0 thru 9
DEFAULT: n/a
DESCRIPTION: Dial stored telephone number "d" (do not include the letter
D in this command).
COMMAND: NdNe
VALUES: d = 0 thru 9; e = any other number 0 thru 9
DEFAULT: n/a
DESCRIPTION: Number Linking. If first number dialed is busy, another
stored number may be automatically dialed. For example, if
stored number "d" is dialed, and is busy, stored number "e"
is then dialed.
COMMAND: O
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Exit Command Mode and go into On-Line Mode.
COMMAND: P
VALUES: n/a
DEFAULT: Tone Dial
DESCRIPTION: Modem will pulse-dial numbers following the P.
COMMAND: &Pn
VALUES: n = 0 or 1
DEFAULT: &P0
DESCRIPTION: &P0 selects 60-40 pulse ratio.
&P1 selects 67-33 pulse ratio.
COMMAND: Qn