Filter
Top Products
Chapter 5 - Remote Configuration
34
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
3. To change the password, press
ÇÇ
ÇÇ
Ç
ÅÅ
ÅÅ
Å
or
ÈÈ
ÈÈ
È to select the first character of the
password, and then press
ÆÆ
ÆÆ
Æ to go to the next character. Repeat until you have
entered the entire password.
4. To cancel the new password, press
ÆÆ
ÆÆ
Æ until the password is erased. To save the
new password, press the Enter button. The next time you remotely configure the
modem you must use the new password.
CC
CC
C
hanghang
hanghang
hang
ing ting t
ing ting t
ing t
he Rhe R
he Rhe R
he R
emote Escemote Esc
emote Escemote Esc
emote Esc
ape Cape C
ape Cape C
ape C
harhar
harhar
har
aa
aa
a
ctercter
ctercter
cter
To improve security, you can change a remote modem’s remote configuration escape character. The
remote configuration escape character is stored in register
S13
. The factory default is 42, which is the
ASCII code for the asterisk character (*). Setting
S13
to 0 (zero) disables remote configuration entirely—
but if you do this remotely, you won’t be able to change it back remotely!
1. Establish a remote configuration link with the remote modem as described in
“Basic Procedure.”
2. Type ATS13=
n
, where
n
is the ASCII code for the new remote configuration
escape character, and then press ENTER.
3. Save the new value by typing AT&W and pressing ENTER.
4. Type ATO<CR> to exit remote configuration.