Filter
Top Products
Chapter 6 - Callback Security
37
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
7. Press the Enter button again to go to the PASSWORD SETUP screen.
8. Press
ÆÆ
ÆÆ
Æ,
ÆÆ
ÆÆ
Æ to go to the ENTER PASSWORD #2? screen.
9. Repeat steps 3–7 to enter the next password.
10. Repeat as many times as necessary, up to memory location 30, until all
passwords have been entered.
Warning: There is no way to review an entry to confirm that it has been entered
correctly. If you attempt to look at a password entry by pressing the Enter button for
an ENTER PASSWORD #
n
? screen, it is possible to accidentally erase the entry.
AA
AA
A
ss
ss
s
sigsig
sigsig
sig
ning Calning Cal
ning Calning Cal
ning Cal
ll
ll
l
baba
baba
ba
cc
cc
c
kk
kk
k
Pho Pho
Pho Pho
Pho
ne Numbersne Numbers
ne Numbersne Numbers
ne Numbers
AT Command MethodAT Command Method
AT Command MethodAT Command Method
AT Command Method
1. Open a data communication program, such as HyperTerminal.
2. To store a callback phone number in the first memory location, type
AT#CBN01=
xxxxxxxxxx
, where
xxxxxxxxxx
is the dialing string, and press ENTER.
The dialing string can include the digits 0 through 9 and any of the following
characters: #, *, comma (,), semicolon (;), W, A, B, C, and D. Up to 30 characters
can be used. Example: AT#CBN01=9,16127853000. If a direct connection with
password protection, but without hangup and callback, is desired, the first
character in the dialing string should be a hyphen (-).
3. To store a callback phone number in the second memory location, type
AT#CBN02=
xxxxxxxxxx
, where
xxxxxxxxxx
is the dialing string, and press ENTER.
Note that the memory location number in the command is incremented by one.
4. Repeat as many times as necessary, through memory location 30, until all
dialing strings have been entered.
Front Panel MethodFront Panel Method
Front Panel MethodFront Panel Method
Front Panel Method
1. Turn on the modem.
2. Starting at the STATUS screen, press the following buttons on the front panel:
ÈÈ
ÈÈ
È,
ÈÈ
ÈÈ
È,
ÆÆ
ÆÆ
Æ,
ÈÈ
ÈÈ
È,
ÈÈ
ÈÈ
È,
ÆÆ
ÆÆ
Æ,
ÈÈ
ÈÈ
È,
ÈÈ
ÈÈ
È,
ÆÆ
ÆÆ
Æ. The ENTER NUMBER #1? screen appears.
3. Press the Enter button on the front panel to select memory location 1. The
ENTER NUMBER screen appears.
4. Press the
ÇÇ
ÇÇ
Ç
ÅÅ
ÅÅ
Å
or
ÈÈ
ÈÈ
È button several times to select the first character. If a direct
connection, without hangup and callback, is desired, the first character in the
dialing string should be a hyphen (-).
5. Press the
ÆÆ
ÆÆ
Æ button to go to the next character in the dialing string.
Note: To backspace or to cancel an entry, press
ÆÆ
ÆÆ
Æ several times.
6. The number can be up to 30 characters in length. Repeat steps 4 and 5 until the
number is entered, and then press the Enter button to store it. The NUMBER
STORED screen should appear.
7. Press the Enter button again to go to the CALLBACK NUMBER screen.