Filter
Top Products
Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 48
HTTP Server Commands – Setup
Command Syntax save param
Description
Invoking this command will save the host parameters into the flash. The
“/var/apps” directory is gun zipped to apps.tar.gz and written into flash.
(APPS _SECTOR)
Default Value
-
Success
OK
Error 1. Too few arguments
“ERROR: Too few arguments
Type 'save ?' for more information”
HTTP Server Commands – Show
Command Syntax show http configuration
Description
Displays the HTTP related configurations.
Default Value
-
Success
OK
Error 1. Too few arguments
“ERROR: Too few arguments
Type 'show http configuration ?' for more information”
Command Syntax show device-parameter P<n>
where n = 0 to 99.
Description
Displays the value of the requested parameter from MultiConnect IP.
Default Value
-
Success
OK
Error 1. Too few arguments
“ERROR: Too few arguments
Type 'show device-parameter ?' for more information”
Command Syntax show device-parameter modified
Description
Displays the status of the host parameters; for example, whether they are
changed by the browser.
Returns “Device parameters changed” when values are changed by the
remote browser.
Returns “Device parameters not changed” when values are not changed.
Default Value
-
Success
OK
Error 1. Too few arguments
“ERROR: Too few arguments
Type 'show device-parameter ?' for more information”