Filter
Top Products
14
Email
To perform an email, do the following:
1. Place the document with the image you want to
email as an attachment face down on your
scanner window glass.
2. Click on the Email button. Status and
Progress Bar area will show emailing progress.
Upon completion, your system will
automatically load your default email program
and place your scanned image as a JPEG file
format attachment.
To set your default email program, refer to the
section BearPaw Panel Settings.
To maximize your overall BearPaw experience, this
function was designed to work only with at least
Microsoft® Internet Explorer 4.0 OR Netscape®
Communicator 4.5 OR Lotus cc:Mail 8.2.
Make sure to setup properly your email program.
Refer to the documentation that came with your
email program or consult your system
administrator if any problem exists.
OCR
To perform an OCR (Optical Character
Recognition), do the following:
1. Place the document with the images/characters
you want recognized face down on your
scanner window glass.
2. Click on the OCR button and the Status and
Progress Bar area will show OCR progress.
Upon completion, your system will
automatically load your default word
processing program and place your scanned
document on screen with a DOC file format.
To enhance your overall BearPaw experience, this
function was designed to work only with
TextBridge™ OCR.
Your default word processing program would
depend on the application software installed in
your computer.