Filter
Top Products
3 - 1
III. INSTALLATION
A. CABLE CONNECTION
Take the cable CCBLA-055-2 out of the accessory bag and
connect the 6 pin DIN male plug of the cable to the central 6 pin female
connector at the bottom of the programmable keyboard (ref. Fig. 3-1),
connect the other end (5 pin DIN male plug) to the PC or a compatible
system. Connect the PC keyboard or any other keyboard wedged input
device such as a CCD scanner to the 5 pin DIN female connector at the
bottom of the programmable keyboard if such connection is required.
For installation in a PS2 or a compatible system with a PS2
interface type KB3100, the cable in the accessory bag should be
CCBLA-055-1. Connect the 6 pin DIN male plug of cable CCBLA-055-
1 to the central 6 pin DIN female connector at the left of the bottom of
the programmable keyboard as the way for PC. Connect the mini DIN 6
male plug of the cable to the PS2 or a compatible system. Connect the
PS2 keyboard or other PS2 keyboard wedged device like a CCD scanner
to the 6 pin mini DIN female connector at the bottom of the
programmable keyboard.
MMAA GGNNEETT
IICC
SSTT RRIIPP
EE
RREE AADDEE
RR
PPOOWWEE
RR
LL44
LL33LL22LL11
LLOO
LLPP
Fig. 3 - 1
KB3100
PC KB
Monitor
PC
CCBLA-055-2