Filter
Top Products
5. Reference
27
5-2. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I connector and DisplayPort connector on
the back of the monitor.
Connection examples
PC 1 PC 2
(Ex.1) Digital DVI
Signal Cable
(FD-C39 enclosed)
Signal Cable
(PP200 optional)
DisplayPort Digital
(Ex.2) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Selecting input signal
Switch the input signal with . Input signal switches each time is pressed. When the signal is
switched, the active signal type (DVI digital, DVI analog or DisplayPort) appears at the top right corner
of the screen.
The monitor recognizes the connector through which PC signals are input. When either PC is turned off
or enters the power-saving mode, the monitor automatically displays signals of another PC.
Input signal setting Performance
Auto If one of the PC turned off or became to power saving mode, the other
signal is automatically displayed.
Manual The monitor detects only the PC’s signals currently displaying automatically.
Select the active input by pressing .
Note
•
When "Auto" is selected for <Input Signal>, the power saving mode of the monitor activates only if
both PCs are in power saving mode.
DVI-I
DisplayPort
Input Signal Selection button