Filter
Top Products
English
16 3. SCREEN ADJUSTMENT
3-3. Color
By using the <Color Mode> in the <Color> menu, the adjustment mode can be selected
from standard mode (to set the color temperature and the color restoration), custom
mode (to adjust each color tone, (Red, Green and Blue) and sRGB mode. These modes
allow you to adjust the color settings according to your preference.
<Standard> mode to set the color temperature and the
color restoration
To set the color temperature
→ Set the <Temperature>.
Temperature can be set from 4,000 K to 10,000 K, in 500 K increments.
(Including the 9,300 K default setting.)
To eliminate disparities in color temperature and brightness due to an
irregular video signal output
→ Execute the <Color Correction>.
Color Correction corrects irregular video signal output levels to eliminate
disparities in color temperature and brightness. Every time the PC (graphics
board) and input signal change, execute color correction.
[Adjustment Procedure]
(1) Open a www browser and the Pattern.html in the EIZO Utility Disk.
Then, maximize the window.
(2) Execute the <Color Correction>. All other adjustments are off during the
correction. (The operation takes about 20 to 30 seconds. Do not change the
“Pattern” during the correction.) When color correction is complete, the result
is displayed.