Eizo FlexScan T966 Computer Monitor User Manual


 
English
3. SCREEN ADJUSTMENT
17
To restore the changed brightness and the color caused by long use to
close to those original ones.
Execute the <Color Restoration>.
The changed brightness and the color caused by long use can be corrected and
restored to close to those factory default settings.
[Adjustment Procedure]
(1) Execute the <Color Restoration>. (The operation takes about one minute.)
(2) When color restoration is completed, the original ScreenManager menu is
displayed.
NOTE
Allow the monitor to stabilize for at least 60 minutes before executing this
function. Otherwise, the warning message “Warming up!” will appear on the
screen.
Execute this function in every fixed time (ex. 2000 hours usage), so that you
can keep stable brightness and color-tone for a long period.
The total usage time (in hour) can be checked as the <Information> in the
<Others> menu.
<Custom> mode: to adjust each color, (Red, Green and
Blue)
Adjust the < Gain (p. 33)>, < Cutoff (p. 33)>
Change the <Color Mode> to <Custom>. The values shown in percentages (%) for
both the Cutoff and Gain are available only as a reference tool.
[Adjustment Procedure]
(1) First, set the monitor to maximum contrast and brightness.
(2) <Temperature> Set the color temperature that is close to the desired color.
(3) Adjust each color to become a uniform black level by using the <Cutoff>
function.
(4) Adjust each color to the desired white level by using the <Gain> function.
(5) Select <Save> and then press the Enter key. (The adjustment data will be lost, if
the monitor is turned off without saving changes).
<sRGB> mode: To select sRGB
Select the <sRGB > in < Color Mode>.
During selecting the <sRGB>, color, brightness and contrast cannot be adjusted.
Likewise, Fine Contrast Mode can not be changed by the AUTO/FINE MODE
button.