Filter
Top Products
English
24 5. TROUBLESHOOTING
Problems Points to check with possible solutions
3. The image vibrates on the screen.
Check that the signal cable is correctly
connected to the PC or graphics board.
The monitor may be located close to a device
that is generating a magnetic field. Such devices
include speakers (other than the EIZO optional
i⋅Sound speaker), electric motors, high-voltage
cables, and other monitors. It may be solved by
turning off or moving the interfering device, or
by relocating the monitor.
Use of the <Moiré Reduction> adjustment may
cause a slight vibration. To eliminate the
vibration, set the adjustment level to lower
percentage or 0%.
If the volume level of the EIZO optional i⋅Sound
speaker is too high, it may, in some cases, cause
a slight vibration. To eliminate, turn down the
volume of the speaker.
4. The image is flickering.
Flicker will occur with interlaced scanning or
non-interlaced scanning with a low refresh rate.
All EIZO monitors are capable of reproducing
high refresh rates for non-interlaced scanning.
If a problem occurs when using a non-interlaced
signal, try adjusting the graphics board to
increased the refresh rate (if possible). Refer to
the graphics board manual for information.
5. Moiré patterns appear.
Reduce the moiré using the <Moiré Reduction>.
Change the horizontal and vertical size of the
display area.
Change the selected desktop or wallpaper
pattern to any solid color pattern. For detailed
information in how to change these patterns,
refer to the PC and operating system manual.