Filter
Top Products
English
2. CABLE CONNECTIONS
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings resolution
(see p.33) and frequency in accordance with the charts below.
NOTE
•
When your computer and display support VESA DDC, the appropriate resolution
and the refresh rate are set just by plugging your display into the computer without
any manual settings.
Display mode Resolution Frequency Dot Clock
Portrait Landscape
720×400
VGA TEXT 70 Hz
√ √
640×480
VGA 60 Hz
√ √
1536×1024
3M Packed Pixel 60 Hz
√ −
1024×1536
3M Packed Pixel 60 Hz
165 MHz
(Max.)
− √
“√“: Supported
2-2. Cable Connection
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
• Refer also to the PC user's manual when connecting the monitor.
• Before a 12bit monochrome signal can be input, your graphics board must be
configured. For details, refer to the user's manual for the graphics board.
1.
Rotate the monitor ninety degrees counter-clockwise into the portrait
position.
12
2. CABLE CONNECTIONS