Filter
Top Products
26
PROGRAMMING (OPTIONAL)
5. Enter the new User Code using the
number buttons. If an old code is
displayed, simply program over it.
To erase the digit at the cursor,
press G, then 0.
Note: Pressing
A again will dis-
play non-programmable "OPTion" and
"ACCess" screens. Do not attempt to
program these screens as the entries
will not be saved.
6. Press
D to save the code in mem-
ory. Repeat steps 3-6 for each user.
Note: Duplicate Codes are not allowed;
therefore a duplicate Code entered in
the LCD Window will erase when D
is pressed.
Note: To void a code, blank out each
digit by pressing
G 0, then
press the Save (D) button.
User 01
To Program User Codes
1. Using Number buttons,
enter User Number
2. Press
A
3. Using number buttons,
enter User Code of up to
6 digits.
4. Press
D to save.
5. Press C to Exit Pro-
gram Mode.
Programming User Codes
Note: Press G, 0 to clear
character at cursor.