Filter
Top Products
28
KEYPAD MESSAGES
The keypad can display the following functional messages. Many are two-line messages; hold down G to display the second
line. (In this booklet, both are shown simultaneously for convenience). Other diagnostic messages are available for the installer or
servicer. Should any unfamiliar messages appear, call your dealer for service.
All zones operating; system can be armed. If displayed, a number following the “READY”
display denotes the area number. A "MONITOR ON" display indicates that Chime or
Watch Mode is on. Note: If Watch Mode is programmed, “MONITOR ON” will not dis-
play for Chime Mode.
Panel reporting to central station on arming. If necessary, wait for ringback signal before
exiting.
Exit delay in progress. XX denotes exit time remaining. If displayed, BYPASSED indicates
arming with zones bypassed; INSTANT ON indicates arming with Instant protection.
Entry delay in progress. XXX shows entry time remaining.
Panel armed. If displayed, a number following the ARMED display denotes the area num-
ber.
Zone(s) not secured (doors or windows may be open). Faulted zone(s) will scroll.
AC ON
READY
AC ON
WAIT
AC ON
EXITXX
AC ON
FAULT
AC ON
ARMED1
AC ON
DISARM
XXXSEC