Filter
Top Products
9
Bypassing Interior Zones
Interior Zones, when bypassed, allow free movement within the premises while the protection of
armed perimeter zones is maintained. If
E is pressed, all interior Zones will be bypassed upon
arming.
(OPTIONAL) Some control panels (such as the GEM-P9600) have provisions for TWO groups of Interior Zones. If two groups of zones were
programmed, proceed as follows:
1. Select the interior group by repeatedly pressing E. The window will display "INT1". "INT2",
or "INT1+2".
2. When the desired interior group is displayed, press
D to select it. "BYPASSED" and
"INTERIOR" will display to indicate interior zones bypassed.
3. Enter your code, then press D. The red ARMED light will turn on and the green STATUS light
will blink, indicating zones bypassed. After the exit time has elapsed, the window will display
"ARMED" and "BYPASSED INTERIOR" will be displayed.
Automatic Interior Bypass (Optional - Automatic Interior Bypass programmed? YES NO)
Your system may have been programmed for Automatic Interior Bypass, which allows it to recognize
that you have armed the system and remained in the house, prompting it to automatically bypass
any Interior Zones. In this case, the keypad display will normally show the icon "BYPASSED", ex-
cept when the system is armed, and the Exit Entry door is opened. At this time those Interior Zones will unbypass, providing complete interior
protection.
Easy Exit (Optional - Available on systems containing Interior Zones).
While the system is armed in the Automatic Interior Bypass state, the Easy Exit option is available. To exit the premises while the system is
armed, press
D and the Exit Delay countdown will begin. You can now exit the premises through the Exit/Entry door and the system will return
to the armed state when the countdown expires.
PROTECTING YOURSELF WHILE ON THE PREMISES
BYPASSED INTERIOR
AC ON
READY
AC ON
INT1+2
BYPASSED INTERIOR
AC ON
READY
BYPASSED INTERIOR
AC ON
ARMED
BYPASSED
AC ON
READY