Filter
Top Products
Chapter 6 VirtualBench-DMM
©
National Instruments Corporation 6-7 Getting Started with VirtualBench
6. Measuring a diode. If you are using a DAQCard-4050 device, you
may measure the voltage drop across a diode, up to two volts.
a. Connect the diode to the terminals of the DAQCard-4050.
b. Click on the sixth (diode) button in the move selector.
c. Click on Run.
d. Click on Run again to stop the measurement.
06Chap06.fm Page 7 Friday, February 28, 1997 3:22 PM