Filter
Top Products
Appendix A Specifications
© National Instruments Corporation A-7 NI 5911 User Manual
Sensitivity............................................... 170 steps in full-scale voltage
range
TRIG input range ...................................±5 V (without external
attenuation)
TRIG input impedance...........................1 MΩ ± 1% in parallel
with 30 pF ± 15 pF
TRIG input protection............................ ±42V [(DC+ peakAC) <10 kHz,
without external attenuation]
Acquisition Modes
RIS .........................................................1 GS/s down to 200 MS/s
effective sample rate, repetitive
signals only. Data is interleaved
in software.
RIS accuracy ..........................................<0.5 ns
Single-shot .............................................100 MS/s down to10 kS/s sample
rate for transient and repetitive
signals
Power Requirements
+5 VDC .................................................4 A
+12 VDC................................................100 mA
–12 VDC ...............................................100 mA
Physical
Dimensions............................................. 33.8 by 9.9 cm
(13.3by3.9in)
I/O connectors
Analog input CH0...........................BNC female
Digital triggers................................SMB female, 9-pin mini DIN