National Instruments NI 5911 Graphics Tablet User Manual


 
© National Instruments Corporation I-1 NI 5911 User Manual
Index
A
AC coupling, 2-4
accuracy characteristics, A-3
acquisition
multiple record, 2-11
Scope Soft Front Panel, 1-3
acquisition characteristics specifications
accuracy, A-3
common-mode characteristics, A-3
distortion, A-5
dynamic range, A-4
filtering, A-4
acquisition modes specifications, A-7
acquisition system specifications, A-1
analog trigger circuit, 2-9
arming. See triggering and arming
B
bias, input, 2-4
block diagram of NI 5911, 2-1
BNC connector, 1-1
C
calibration
errors occurring during acquisition, 2-8
external calibration, 2-8
internal calibration, 2-7
specifications, A-8
clock lines, 2-12
common-mode characteristics, A-3
connectors
BNC connector, 1-1
DIN connector, 1-1
location on front panel (figure), 1-2
SMB connector, 1-1
conventions used in the manual, vi
customer education, B-1
D
dead time, in multiple record acquisition, 2-11
differential input
grounding considerations, 2-2
noise-free signal measurement (figure), 2-2
differential programmable gain input amplifier
(PGIA)
AC coupling, 2-4
differential input, 2-2
input bias, 2-4
input impedance, 2-3
input protection, 2-4
input ranges, 2-3
noise-free signal measurement (figure), 2-2
DIN connector, 1-1
distortion specifications, A-5
dynamic range specifications, A-4
E
EMC compliance, A-8
errors during acquisition, 2-8
F
filtering specifications, A-4
flexible resolution mode
available sampling rates (table), 2-6
definition, 2-5
memory sample depth (table), A-2
purpose and use, 2-6
sampling rate specifications (table), A-1