Filter
Top Products
Glossary
NI 5911 User Manual G-8 ni.com
sense in four-wire resistance the sense measures the voltage across the resistor
being excited by the excitation current
settling time the amount of time required for a voltage to reach its final value within
specified limits
source impedance a parameter of signal sources that reflects current-driving ability of voltage
sources (lower is better) and the voltage-driving ability of current sources
(higher is better)
system noise ameasure of the amountof noise seen by ananalog circuit or anADC when
the analog inputs are grounded
T
temperature
coefficient
the percentage that a measurement will vary according to temperature.
See also thermal drift
thermal drift measurements that change as the temperature varies
thermal EMFs thermal electromotive forces—voltages generated at the junctions of
dissimilar metals that are functions of temperature. Also called
thermoelectric potentials.
thermoelectric
potentials
see thermal EMFs
transfer rate the rate, measured in bytes/s, at which data is moved from source to
destination aftersoftwareinitialization andset up operations; themaximum
rate at which the hardware can operate
trigger any event that causes or starts some form of data capture
U
undersampling sampling at a rate lower than the Nyquist frequency—can cause aliasing
update rate the number of output updates per second