Filter
Top Products
Chapter 5 Troubleshooting
© National Instruments Corporation 5-3 NI PXIe-8105 User Manual
3. Move the jumper on W2 from pins 1–2 to pins 2–3 as shown in
Figure 5-1.
4. Wait one second. Move the jumper back to pins 1–2.
5. Reinstall the controller in the chassis.
Caution Do not leave the jumper on pins 2–3. Doing so decreases battery life. Also, the
controller will not boot.
Figure 5-1. Clearing the CMOS Contents
1 Normal Operation (Default) 2 Clear CMOS Contents 3Pin 1
1
2
3