Filter
Top Products
Chapter 3 PXI Serial Hardware Installation, Verification, and Configuration
© National Instruments Corporation 3-3 Serial Hardware and Software for Windows
Figure 3-1. Installing the PXI Serial Board
6. Screw the PXI serial board front panel to the front panel mounting rail
of the PXI or CompactPCI chassis.
7. Turn on your PXI or CompactPCI chassis and start Windows 2000.
8. Windows 2000 should automatically detect your hardware and display
the Found New Hardware Wizard. Complete the wizard by clicking
Next in each window and then Finish.
If the Found New Hardware Wizard does not appear, refer to the
Forcing Windows to Detect Your Hardware section in Appendix D,
Troubleshooting and Common Questions.
The serial hardware installation is complete. Continue to the next section,
Verify the Installation.
1 Injector/Ejector Handle (In Down
Position)
2 PXI Serial Board
3 PXI Chassis
4 Injector/Ejector Rail
8
7
6
5
4
3
2
1
ON
STANDBY
4
1
2
3