Filter
Top Products
1–
5
7837 User’s Guide
The RS-232 Interface bar code is used when connecting to the serial port of a
PC or terminal. The following RS-232 Interface bar code also programs the
parameters:
Option
Setting
Baud Rate 9600 bps
Parity Even
Data Format 7 data bits, parity bit, 1 stop bit (8 bit data)
RS-232 Interface
In Wand Emulation mode, the scanner decodes the bar code then sends data
in the same format as a wand scanner. The Same Code format transmits
UPC, EAN, Code 128 and Interleaved 2 of 5 bar codes without any changes,
but converts all other symbologies to Code 39.
Wand Emulation Same Code
The following Wand Emulation bar code sets the interface to Wand Emulation
mode and translates bar code data as Code 39 symbology. It also programs
the Transmission Rate to 25 inches per second, and Output Polarity to black
high.
Wand Emulation (Code 39 Format)