Filter
Top Products
Controls cont.ols
11
Information
DISPLAY MODE: Provides information about the current resolution display and
technical data including the preset timing being used and the horizontal and
vertical frequencies.
MONITOR INFO: Indicates the model and serial numbers of your monitor.
OSM
™
Warning
NO SIGNAL: This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
is inactive, the No Signal window will appear. The PROCEED button opens
the DVI SELECTION CONTROL, as indicated in the section for DVI selection.
RESOLUTION NOTIFIER: This function gives a warning of use with opti-
mized resolution. After power is turned on or when there is a change of
input signal or the video signal doesn’t have proper resolution, the
Resolution Notifier window will open. This function can be disabled in
the TOOL menu.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a
change of input signal or the video signal doesn’t have proper timing, the
Out Of Range menu will appear. The PROCEED button opens the DVI
SELECTION CONTROL, as indicated in the section for DVI selection.
NOTE: If “ CHANGE DVI SELECTION” is displayed,switch to DVI
SELECTION.
2010X.wpc 7/13/00, 5:01 PM13