NEC LCD2010X Computer Monitor User Manual


 
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE MULTISYNC
®
LCD COLOR MONITOR:
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and
opening or removing covers may expose you to dangerous shock hazards or other
risks. Refer all servicing to qualified service personnel.
Do not spill any liquids into the cabinet or use your monitor near water.
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous
voltage points, which can be harmful or fatal or may cause electric shock, fire or
equipment failure.
Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.
Do not place this product on a sloping or unstable cart, stand or table, as the monitor
may fall, causing serious damage to the monitor.
The power cable connector is the primary means of detaching the system from the power
supply. The monitor should be installed close to a power outlet that is easily accessible.
When operating the MultiSync LCD monitor with its AC220-240V worldwide power supply,
use a power supply cord that matches the power supply voltage of the AC power outlet
being used. The power supply cord you use must have been approved by and comply with
the safety standards of your country. (Type H05VV-F should be used except in UK)
Do not place any objects onto the monitor and do not use the monitor outdoors.
The inside of the fluorescent tube located within the LCD monitor contains mercury.
Please follow the bylaws or rules of your local municipality to dispose of this tube properly.
In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed
for use with this monitor. If a power cord is not supplied with this monitor, please contact
your supplier.
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
When the power supply cord or plug is damaged.
If liquid has been spilled or objects have fallen into the monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet is damaged.
If the monitor does not operate normally by following operating instructions.
Allow adequate ventilation around the monitor so that heat can properly
dissipate. Do not block ventilated openings or place the monitor near a
radiator or other heat sources. Do not put anything on top of monitor.
The power cable connector is the primary means of detaching the system
from the power supply. The monitor should be installed close to a power
outlet which is easily accessible.
Use caution when carrying the monitor,as the compact stand may extend
automatically.
Handle with care when transporting. Save packaging for transporting.
Do not bend power cord.
Do not use monitor in high temperatured, humid, dusty, or oily areas.
Do not cover vent on monitor.
If monitor is broken, do not come in contact with the liquid crystal.
Recommended Use
12
CAUTION
2010X.wpc 7/13/00, 5:01 PM14