Filter
Top Products
Configuring Your Server 4-33
Menu Tree
Setting list
+: Selection/execution parameter : Setting parameter. •: Information display
>: Can be set (modified) after creation of logical drive
Menu Description
+Configure Performs Configuration settings
+Easy Configuration Set configuration (Using fixed value)
+New Configuration Set new configuration
+View/Add Configuration Additional setting / viewing configuration
+Clear Configuration Clear configuration
+Select Boot Drive Chose Bootable Logical Drive
+Initialize Initialize logical drive
+Objects Various settings
+Adapter Set disk array controller
+Sel. Adapter Clear configuration
Rebuild Rate 30
Chk Const Rate 30
FGI Rate 30
BGI Rate 30
Disk WC Display default value (setting not required)
Read Ahead On
Bios State Enable
Stop on Error No
Fast Init Enable
Auto Rebuild On
Auto Resume Enable
Disk Coercion 1GB
Factory Default Default setting
+Logical Drive Logical drive operation
+Logical Drives Select lo
g
ical drive
(
when multiple lo
g
ical drives exist
)
+Initialize Initialize logical drive
+Check Consistency Check logical drive redundancy
+View/Update Parameters Display logical drive information
• RAID Display RAID level
• SIZE Display logical drive capacity
• Stripe SIZE Display stripe size
• #Stripes Displa
y
the number of hard disk drives in lo
g
ical drive
• State Display logical drive status
• Spans Display setting of span
• Disk WC Display setting of write cache
• Read Ahead Display setting of read ahead
+Physical Drive Physical drive operation
+Physical Drive Selection Menu Select physical drive
+Make HotSpare Set as hot-spare disk for auto rebuilding
+Force Online Make a disk online
+Force Offline Make a disk offline
+Drive Properties Display hard disk drive information
• Device Type Hard disk drive type
• Capacity Hard disk drive capacity
• Product ID Hard disk drive model
• Revision No. Hard disk drive revision
+Rebuild Perform rebuilding
+Check Consistency Perform logical drive redundancy check