Filter
Top Products
Troubleshooting 7-15
Message Meaning Action
The driver failed to switch
Primary/Secondary state of the
IO module.
The driver was unsuccessful to
change the primary/secondary
state of the IO module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver started to bind the
Module.
The driver started bindng the
CPU/IO module.
The driver finished successfully
to bind the Module.
The driver successfully bounded
the module.
The server is operating
normally.
The driver failed to bind the
Module.
The driver was unsuccessful to
bind the module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver accepted to remove
the Module.
The driver received an instruction
to disconnect the module.
The driver started to remove
the Module.
The driver started disconnecting
the module.
The driver finished successfully
to remove the Module.
The driver successfully
disconnected the module.
The server is operating
normally.
The driver failed to remove the
Module.
The driver was unsuccessful to
disconnect the module.
There may be problem in
the hardware environment.
Contact your sales agent.
The driver accepted to update
the BIOS.
The driver received an instruction
to update BIOS.
The driver started to update the
BIOS.
The driver started updating
BIOS.
The driver finished successfully
to update the BIOS.
The driver successfully updated
BIOS.
The server is operating
normally.
The driver failed to update the
BIOS.
The driver was unsuccessful to
update BIOS.
The error occurred on the
South Bridge.
There was a South Bridge error.
There may be problem in
the hardware environment.
Contact your sales agent.
FT nonfatal error occurrred. NEC GeminiEngine HA System
Controller detected an error.
The error occurred on the CPU
module.
There was a CPU module error.
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
The error occurred on the PCI
Express.
There was a PCI Express error.
The driver detected that the
Module was not working.
A module error was detected.
There may be problem in
the hardware environment.
Contact your sales agent.
DMA error occurred. There was a DMA error.
Legacy device error occurred. There was a legacy device error.
Surprise remove occurred. Supprise removal occurred.
There may be problem in
the hardware environment.
Contact your sales agent.