Filter
Top Products
Troubleshooting 7-17
Message Meaning Action
Memory check failed. Memory check failed. If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
Memory copy was started. Memory copy was started.
The Module got power down in
the middle of handling failure.
The module was powered off
while troubleshooting an error.
The server is operating
normally.
The Module or the CPU module
detected the state change in
the middle of handling failure of
the CPU module so stopped the
action.
The processing was stopped
because a change in the CPU
module state was detected while
troubleshooting a CPU error.
The Module BIOS CPU state
did not become [CPU stop
(reset waiting)].
The CPU state of BIOS did not
become [CPU stop (reset
waiting)].
If the message is recorded
frequently, there may be
problem in the hardware
environment. Contact your
sales agent.
The Module broke down. The IO module failed. There may be problem in
the hardware environment.
Contact your sales agent.
The serial number of the
Module was invalid.
The serial number of the module
is invalid.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
Base address reading error.
(PCI Config)
Base address reading error.
(PCI Config)
The system abnormality of the
Module was detected.
Abnormality in the module was
detected.
There may be problem in
the hardware environment.
Contact your sales agent.
The POST timeout occurred in
the Module.
A POST timeout occurred in the
module.
The POST error occurred in the
Module.
A POST error occurred in the
module.
If the message is recorded
frequently, there may be
problem in the system
environment. Contact your
sales agent.
[Do not bind] is set by MTBF
type.
The MTBF type of the module is
set to [Do not bind].
An illegal type is set to MTBF
type.
The specified MTBF type of the
module is invalid.
There may be problem in
the system environment.
Contact your sales agent.
The driver accepted to switch
the Secondary Module.
The driver received an instruction
to switch the secondary module.
The driver started to switch the
Secondary Module.
The driver started switching the
secondary module.
The driver finished successfully
to switch the Secondary
Module.
The driver successfully switched
the secondary module.
The server is operating
normally.