Filter
Top Products
9
Controls cont.
IPM
™
System Off Mode:
Enable: The IPM System works
normally and all stages of
energy savings are utilized.
Disable: The Off Mode of the IPM
System is not used.
N
OTE: For standard systems and graphics boards, keep the factory setting
at ENABLE
.
EdgeLock
™
Control: Operating your monitor at a non-standard timing may
cause images to appear darker than normal or have color distortion. Use of the
EdgeLock control will adjust images to their normal state.
Refresh Notifier: A message will advise you if the refresh rate of the signal being
applied to the monitor by the computer is too low. For further information, please
refer to your display card or system manual.
Information
Display Mode: Indicates the current mode and frequency setting of the monitor.
Fitness Tips: The Fitness Tips provide you with helpful reminders to periodically
rest your eyes. You may select how frequently the reminders are displayed based
upon your individual needs. Select an interval from 15, 30, 45, 60, 90 or 120
minutes for the tips to appear. When the tips appear, follow the advice of the tips
and press EXIT to clear.
Monitor Info: Indicates the model and serial numbers of your monitor.
78134171 12/3/98, 4:10 PM11