Filter
Top Products
19
... English
User Controls
Clock
“Clock” changes the display data frequency to match the frequency
of your computer’s graphic card. If you experience a vertical icker-
ing bar, use this function to make an adjustment.
Phase
Synchronize the signal timing of the projector with the graphics
card. If you experience an unstable or ickering image, use this
function to correct it.
White Peaking
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for maxi-
mum peaking. If you prefer a stronger image, adjust towards the
maximum setting. For a smooth and more natural image, adjust
towards the minimum setting.
Color Temp.
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
Gamma
This allows you to choose a gamma table that has been ne-tuned to
bring out the best image quality for the input.