Filter
Top Products
33
... English
Appendices
Replacing the lamp
(optional lamp NP10LP)
The projector will detect the lamp life at 3400 hours in Normal
mode. When the “Power” LED indicator ashes red and the
message below displays on-screen, the projector has detected
that the lamp is approaching its end of life. (Use the same ex-
planations on page 14) It will show you a warning message
When you see this message, change the lamp as soon as pos-
sible. Make sure the projector has been cooled down for at
least 60 minutes before changing the lamp.
Warning: To avoid
burns, allow the projec-
tor to cool for at least
60 minutes before you
replace the lamp!
1
3
4
2