Filter
Top Products
32
3.OPERATION
Source Information
Provides and changes information for the parameters of your current
projected source.
NOTE: For other registered signals, change their parameters on the
Source Registry menu.
The menu items you can display, change or specify are as follows:
Source Name--------------- Changes a user name that has previ-
ously been entered.
Direct Key ------------------ Assigns settings of source to each
INPUT button (1-10) with CTL.
Input Slot ------------------- Selects an input terminal for the
registered signal when you need to do
due to adding optional equipment.
Signal System-------------- Displays the signal system of the
current source such as RGB, Video, S-
Video, or Component signal.
Video System -------------- Displays the current video standard.
Sync Frequency (H/V)----- Displays the current sync frequency.
Sync Polarity (H/V) -------- Displays the current sync polarity.
Sync System --------------- Selects the detection method of the
sync signal.
Sync Termination---------- Selects the impedance of the sync
signal.
Display Mode -------------- Selects the image display mode.
Color Matrix ---------------- Selects the mode to match the output
format of an HDTV or DVD signal.
CTI Control ----------------- Turns this feature on so you can make
the color sharper.
Noise Reduction ----------- Turns this feature on so video noise can
be reduced.
Stadium Mode ------------- Selects this feature so the picture is
expanded in the horizontal and vertical
directions at different ratios.
Source Select Counter ---- Resets the number of times a signal is
selected for display.
Source Display Timer ----- Resets the time of signal display.
Use the CURSOR or button to select the item you want to
view or set.
(Color Transient Improvement)
Source Information
(List No. 99)
Page1/2
Source Name
Direct Key
Input Slot
Signal System
Video System
Sync Frequency
Sync Polarity
[NTSC3.58]
[CTL+10 Key ]
[INPUT A ]
S-VIDEO
NTSC3.58
Cinema
fH= 15.74KHz
fV= 61.23Hz
HD(+) VD(+)
Source Information
(List No. 99)
Page2/2
Sync System
Sync Termination
Display Mode
Color Matrix
CTL Control
Noise Reduction
Stadium Mode
Select Counter
Display Timer
[Auto ]
H/V Separate
[Hi-Z ]
[00:NTSC ]
[Y,B-Y,R-Y ]
[OFF ]
[OFF ]
[Normal ]
0000
0000H 00M