Filter
Top Products
45
Source Registry
1. INPUT A
2. Signal
3. HDTV
4. User Name
5. No.
Select Signal System
<Prev Next> Cancel
2. Signal System
RGB
C-Video
S-Video
COMPONENT
Source Registry
1. INPUT A
2. COMPONENT
3. HDTV
4. User Name
5. No.
Is Signal HDTV?
<Prev Next> Cancel
3. HDTV
Yes
No
Source Registry
1. INPUT A
2. COMPONENT
3. HDTV Mode
4. User Name
5. No.
Input User Name
<Prev Next> Cancel
4. User Name
[ ]
4) To Input a User Name.
Input the source name by selecting one character at a time with
the INPUT buttons 1 through 10 and by moving the cursor with
the CURSOR button. After finishing the selection of the
characters, press ENTER.
• Up to eight characters can be selected.
• Eight characters are assigned to one INPUT button.
• Whenever the INPUT button is pressed, characters will be
rotated.
When using with two or more ISS-6020/ISS-6020G switchers:
Use the CURSOR or button to select the input slot number of
the master Switcher and press ENTER. Then select the slot
number of the slave Switcher and press ENTER.
• The “MASTER” menu will be displayed when the slot
number of the master Switcher is selected.
• The “SLAVE” menu will be displayed when the slot number
of the slave Switcher is selected.
• The “4. User Name” screen will be displayed when you finish
entering the slot number.
2) To Select Signal System
Select your desired signal system.
Items to select
• RGB ----------- Selects the RGB input signal of this
projector
• C-Video ------- Selects the VIDEO input signal of this
projector
• S-Video ------- Selects the S-VIDEO input signal of this
projector.
• COMPONENT Selects the component input signal of this
projector.
3) To Set HDTV or not When Selecting Component Signal.
When you select COMPONENT, you are asked if the compo-
nent is HDTV or not.
Select Yes or No according to your component source.
3.OPERATION