Filter
Top Products
50
3.OPERATION
Display Function
Enables you to adjust various items such as the field handling,
interlace mode and sync protect if the image is not displayed
correctly. Normally you do not need to set these items.
Items to select
• Field Handling -------- Sets the high refresh signal or interlace or
both
• Interlace Mode ------- Selects the interlace mode.
• Sync Protect ---------- Adjusts bending on the top of the screen.
1) Field Handling
Items to select
• None. ----------------- Normally select this mode.
• Frame Drop (FD)----- Select this mode for a high refresh signal.
• Field Jam (FJ) -------- Select this mode for an interlace signal.
• FJ & FD --------------- Select this mode for a high refresh interlace
signal.
2) Interlace Mode
Select the appropriate mode for an interlace signal viewing the
image. Normally select the mode preset at the factory.
3) Sync Protect
After selecting ON, adjust the bending of the top of the screen.
Normally select OFF.
To adjust, use the CURSOR or to adjust the level viewing
the screen.
To switch the top or the bottom, press the CURSOR or
button.
-Display Function-
1. Field Handling
2. Interlace Mode
3. Sync Protect
Field Handling
None.
Frame Drop(FD)
Field Jam(FJ)
FJ & FD
Interlace Mode
Non Std: Odd
Non Std: Odd-1
Non Std: Odd+1
Std : Odd
Std : Odd-1
Std : Odd+1
Display Function
- Sync Protect -
Sync Protect Switch [Off ]
1024(U)
1024(D)