Filter
Top Products
E – 36
Factory Default
Returns all adjustments and settings to the factory preset level.
All Data: Resets all adjustments and settings for all the
signals to the factory preset.
Including Entry List
: Also deletes all the signals in the Entry List
and returns to the factory preset.
Current Signal: Resets the adjustments for the current signal
to the factory preset levels.
NOTE: The items that can be reset are all the items in the Adjust-
ments and Image Options except for Keystone and Lamp Output.
Image Options
Provides optional controls such as gamma correction, component
signal selection, wide screen and video noise reduction features.
Image Mode
Aspect Ratio: This feature allows you to display the incoming
video signal in the correct proportion.
Normal: Displays normal video picture with a 4-to-3 aspect ratio
as is.
Zoom: Displays DVD’s video picture with a 16-to-9 aspect ra-
tio expanded in the horizontal and vertical direction,
maintaining the original proportion.
Wide Zoom: Displays DVD’s squeezed video picture with a
16-to-9 aspect ratio expanded in the horizontal direc-
tion, converted to 4-to-3 aspect ratio.
Cinema: Displays DVD’s squeeze video picture with a 16-to-9
aspect ratio compressed in the vertical direction, main-
taining the 16-to-9 aspect ratio.
Anamorphic: Select this mode for use of anamorphic lens. This
mode will change the aspect ratio according to the lens.
This feature is used to correct vertical jitter of non-standard inter-
laced signal. Select one of the three VD delay levels.
Clamp Timing (Expert mode only):
This function sets the standard black level position of the displayed
image. Select one of the following three options.
Auto: Normal setting.
Tri-Sync: Setting for HDTV signal
Front Porch: For other settings than above
Video Mode
Gamma
This option corrects gamma. Select the appropriate item.
NTSC : Setting for NTSC signals
Graphics : Setting for Computer Graphics
Graphics/NTSC : Setting for both Computer Graphics and
NTSC signals
PAL/SECAM 2.8 : Setting for PAL and SECAM signals at the
gamma value of 2.8
PAL/SECAM : Setting for PAL and SECAM signals
Natural 1 : Setting for Video and S-Video signal
Natural 2 : Setting for component signal
VD Delay (Expert mode only):