www.netcomm.com.au Rev.1 - YML658
Page 16 AM5698 Roadster V.92 User Guide
Using your Roadster V.92 Modem with FaxTalk
Configuring voice/fax mailboxes
Voice/fax mailboxes are the basic type of mailbox used by FaxTalk Communicator. These
mailboxes can receive both voice messages and faxes. You can also configure a Voice/
fax mailbox to act as an announce only or fax only mailbox.
To change the settings of a Voice/fax mailbox, select the desired mailbox and click
Properties. A Voice/fax mailbox contains three configuration tabs.
General settings
The General tab contains the mailbox settings such as mailbox name, maximum message
length, and remote access password.
Voice /Fax Mailbox General Configuration Screen
Setting the maximum message length You can control the length of time a caller has to
leave a message. Each mailbox can be set to a specific message length of between 1
and 999 seconds. To change the maximum message length:
1. Click the up or down arrows on the Maximum Message Length setting to change
the value. You can also type a new value directly into the field.
2. Click OK to save the change.