NetComm N150 Network Router User Manual


 
NetComm Liberty Series 3G Wireless N150 Wireless Router YML17WNYML17WN17WN
22 www.netcomm.com.au
PPTP
PPTP (Point to Point Tunneling Protocol) allows for a secure connection over the Internet by simply dialing in a local point provided by your
ISP provider. The following screen allows client PCs to establish a normal PPTP session and provides hassle-free conguration of the PPTP
client on each client PC.
Name Description
Server IP address: Type in the server IP address assigned by your Internet Service Provider.
PPTP Account/
Password:
Type in the username and password assigned by your provider.
Address Mode: Select Dynamic if your service uses a DHCP server, or select Static and type in the
IP address, Subnet Mask and Default Gateway assigned by your Internet Service
Provider.
Operation Mode; There are 3 options:
‘Keep Alive’ - Keeps the Internet connection alive, does not disconnect.
‘On Demand’ - Only connects to the Internet when there’s a connect attempt
‘Manual’ - Only connects to the Internet when the ‘Connect’ button on this page is pressed,
and disconnects when the ‘Disconnect button is pressed.
MAC Clone: Please input the MAC address of your computer here, if your service provider only
permits computers with a certain MAC address to access Internet. If you’re using
the computer which used to connect to Internet via cable modem, you can simply
press ‘Fill My MAC’ button to ll the MAC address eld with the MAC address of your
computer.
Click Apply to save the settings.
WAN Failover Backup
The WAN Failover Backup feature of the 3G17Wn is designed to provide a backup 3G Internet connection in case your primary connection
should fail. To use this feature, you will need both an Ethernet WAN connection (from an xDSL modem/ISDN/Satellite etc) and a 3G WAN
connection.
To set up WAN failover on your 3G Router, rst tick “Enable automatic 3G backup”, then ll in the elds that appear.
Name Description
Internet Host: Enter an Internet address here to check the Internet connection
APN: Enter the APN for your 3G USB modem
User Name: Enter your 3G username
Password: Enter your 3G password
Click Apply to save the settings.